|
|
45 Degree Bevel 5 Front Face Design Fancy 20oz Copper Funnel Scuppers w/ Internal Liners Fabrication Photo Page Updated 3 / 2022 |
 |
Company Profile |
|
Roof Caps |
|
Chimney Caps |
|
Scuppers |
|
Gutters |
|
Shipping |
|
Contact Info |
|
Here is the assembly of a set of 7 custom rain scuppers I fabricated back in 2008. This is to better give you an idea of what I can offer you Note: remember that you can click on each picture shown to get a closer look |
|
  .   .   .   |
|
|
 |
 These were made for a local client,
whom would rather not be named here.
This was my first client to request I recreate that old scupper
I had replaced back in 2002 on Dale Yocum's house. The old scupper was 17" wide, so I had to carefully scale it down to fit the 14" width this client wanted. They had me make 7 of these classic scuppers for their house and garage remodel in Southeast Portland, Oregon along with the 521' 20oz copper gutters plus downspouts. Their cost at that time was $500 each installed back in 2008. These days it would run more like $1k each. To see more of this house go to: http://dmr-gutters.com/cg/TaraNorth.htm |
|
|
These 3 units in the foreground are the 3.25" X 10" super outlets that feed into a 3X4 elbow. They get mounted just under the gutter and feed the rain water into these scuppers. |
|
  .   |
|
..
]
|
Below is a photo of our |
|
|
|
We were also a 1997 finalist for this same award. See our referral web page to see how we managed to be honored with this special award |
 Homepage |
|
|
Company Profile |
|
Roof Caps |
|
Chimney Caps |
|
Scuppers |
|
Gutters |
|
Shipping |
|
Contact Info |
.
.
.
.
.
.
.
.
.
.
.
