Cunningham - Custom 32oz Copper Outdoor Fire Pit Cover Photo & Price Page Updated 11 / 10 / 2010 |
Company Profile |
Roof Caps |
Chimney Caps |
Scuppers | Gutters | Shipping | Contact Info |
..
Note: remember that you can click on each picture shown to get a closer look |
This custom copper fire pit cover I made out of a thicker 32oz copper to cover their outdoor gas fire pit in order to keep it clean and dry when not in use. Brigitta and Dennis Cunningham contacted me on 6/19/08 and it was shipped off to them by 7/28/08. Here is some of the before and after shots I got from them. Here's a few shots I sent them during the fabrication process: I add the bottom skirting to raise it up higher for more clearance that you may need, along with the 1/2" copper piping along the bottom for more strength. Then I attached the handles with brackets and stainless steel bolts.
Cost: $1,293.27 delivered to Hicksville, New York
This shows the protective packaging and crate I made for it's safe journey across the Country |
..
Below is a photo of our |
We were also a 1997 finalist for this same award. See our referral web page to see how we managed to be honored with this special award |
Homepage |
Company Profile |
Roof Caps |
Chimney Caps |
Scuppers | Gutters | Shipping | Contact Info |
.
.
.
.
.
.
.
.
.
.
.